qmk

Unnamed repository; edit this file 'description' to name the repository.
git clone git://git.z3bra.org/qmk.git
Log | Files | Refs | Submodules | LICENSE

rules.mk (3132B)


      1 # project specific files
      2 SRC =	keyboards/zeal60/zeal60.c \
      3 		keyboards/zeal60/rgb_backlight.c \
      4 		quantum/color.c \
      5 		drivers/issi/is31fl3218.c \
      6 		drivers/avr/i2c_master.c
      7 
      8 
      9 # MCU name
     10 MCU = atmega32u4
     11 
     12 # Processor frequency.
     13 #     This will define a symbol, F_CPU, in all source code files equal to the
     14 #     processor frequency in Hz. You can then use this symbol in your source code to
     15 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
     16 #     automatically to create a 32-bit value in your source code.
     17 #
     18 #     This will be an integer division of F_USB below, as it is sourced by
     19 #     F_USB after it has run through any CPU prescalers. Note that this value
     20 #     does not *change* the processor frequency - it should merely be updated to
     21 #     reflect the processor speed set externally so that the code can use accurate
     22 #     software delays.
     23 F_CPU = 16000000
     24 
     25 
     26 #
     27 # LUFA specific
     28 #
     29 # Target architecture (see library "Board Types" documentation).
     30 ARCH = AVR8
     31 
     32 # Input clock frequency.
     33 #     This will define a symbol, F_USB, in all source code files equal to the
     34 #     input clock frequency (before any prescaling is performed) in Hz. This value may
     35 #     differ from F_CPU if prescaling is used on the latter, and is required as the
     36 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
     37 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
     38 #     at the end, this will be done automatically to create a 32-bit value in your
     39 #     source code.
     40 #
     41 #     If no clock division is performed on the input clock inside the AVR (via the
     42 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
     43 F_USB = $(F_CPU)
     44 
     45 # Interrupt driven control endpoint task(+60)
     46 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
     47 
     48 # Boot Section
     49 BOOTLOADER = atmel-dfu
     50 
     51 # Do not put the microcontroller into power saving mode
     52 # when we get USB suspend event. We want it to keep updating
     53 # backlight effects.
     54 OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
     55 
     56 
     57 # Build Options
     58 #   change yes to no to disable
     59 #
     60 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
     61 MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
     62 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
     63 CONSOLE_ENABLE = no         # Console for debug(+400)
     64 COMMAND_ENABLE = no        # Commands for debug and configuration
     65 NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
     66 BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
     67 MIDI_ENABLE = no            # MIDI controls
     68 AUDIO_ENABLE = no           # Audio output on port C6
     69 UNICODE_ENABLE = no         # Unicode
     70 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
     71 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
     72 
     73 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
     74 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
     75 
     76 RAW_ENABLE = yes
     77 DYNAMIC_KEYMAP_ENABLE = yes
     78 CIE1931_CURVE = yes
     79