qmk

Unnamed repository; edit this file 'description' to name the repository.
git clone git://git.z3bra.org/qmk.git
Log | Files | Refs | Submodules | LICENSE

rules.mk (3014B)


      1 # project specific files
      2 SRC =	keyboards/zeal60/zeal60.c
      3 
      4 # MCU name
      5 MCU = atmega32u4
      6 
      7 # Processor frequency.
      8 #     This will define a symbol, F_CPU, in all source code files equal to the
      9 #     processor frequency in Hz. You can then use this symbol in your source code to
     10 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
     11 #     automatically to create a 32-bit value in your source code.
     12 #
     13 #     This will be an integer division of F_USB below, as it is sourced by
     14 #     F_USB after it has run through any CPU prescalers. Note that this value
     15 #     does not *change* the processor frequency - it should merely be updated to
     16 #     reflect the processor speed set externally so that the code can use accurate
     17 #     software delays.
     18 F_CPU = 16000000
     19 
     20 
     21 #
     22 # LUFA specific
     23 #
     24 # Target architecture (see library "Board Types" documentation).
     25 ARCH = AVR8
     26 
     27 # Input clock frequency.
     28 #     This will define a symbol, F_USB, in all source code files equal to the
     29 #     input clock frequency (before any prescaling is performed) in Hz. This value may
     30 #     differ from F_CPU if prescaling is used on the latter, and is required as the
     31 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
     32 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
     33 #     at the end, this will be done automatically to create a 32-bit value in your
     34 #     source code.
     35 #
     36 #     If no clock division is performed on the input clock inside the AVR (via the
     37 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
     38 F_USB = $(F_CPU)
     39 
     40 # Interrupt driven control endpoint task(+60)
     41 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
     42 
     43 # Boot Section
     44 BOOTLOADER = atmel-dfu
     45 
     46 # Do not put the microcontroller into power saving mode
     47 # when we get USB suspend event. We want it to keep updating
     48 # backlight effects.
     49 OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
     50 
     51 
     52 # Build Options
     53 #   change yes to no to disable
     54 #
     55 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
     56 MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
     57 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
     58 CONSOLE_ENABLE = no         # Console for debug(+400)
     59 COMMAND_ENABLE = no        # Commands for debug and configuration
     60 NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
     61 BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
     62 MIDI_ENABLE = no            # MIDI controls
     63 AUDIO_ENABLE = no           # Audio output on port C6
     64 UNICODE_ENABLE = no         # Unicode
     65 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
     66 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
     67 
     68 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
     69 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
     70 
     71 RAW_ENABLE = yes
     72 DYNAMIC_KEYMAP_ENABLE = yes
     73 CIE1931_CURVE = no
     74