qmk

QMK Firmware
git clone git://git.z3bra.org/qmk.git
Log | Files | Refs | Submodules | LICENSE

rules.mk (2569B)


      1 #----------------------------------------------------------------------------
      2 # On command line:
      3 #
      4 # make all = Make software.
      5 #
      6 # make clean = Clean out built project files.
      7 #
      8 # make coff = Convert ELF to AVR COFF.
      9 #
     10 # make extcoff = Convert ELF to AVR Extended COFF.
     11 #
     12 # make program = Download the hex file to the device.
     13 #                Please customize your programmer settings(PROGRAM_CMD)
     14 #
     15 # make teensy = Download the hex file to the device, using teensy_loader_cli.
     16 #               (must have teensy_loader_cli installed).
     17 #
     18 # make dfu = Download the hex file to the device, using dfu-programmer (must
     19 #            have dfu-programmer installed).
     20 #
     21 # make flip = Download the hex file to the device, using Atmel FLIP (must
     22 #             have Atmel FLIP installed).
     23 #
     24 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
     25 #               (must have dfu-programmer installed).
     26 #
     27 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
     28 #                (must have Atmel FLIP installed).
     29 #
     30 # make debug = Start either simulavr or avarice as specified for debugging,
     31 #              with avr-gdb or avr-insight as the front end for debugging.
     32 #
     33 # make filename.s = Just compile filename.c into the assembler code only.
     34 #
     35 # make filename.i = Create a preprocessed source file for use in submitting
     36 #                   bug reports to the GCC project.
     37 #
     38 # To rebuild project do "make clean" then "make all".
     39 #----------------------------------------------------------------------------
     40 # Build Options
     41 #   change to "no" to disable the options, or define them in the makefile.mk in 
     42 #   the appropriate keymap folder that will get included automatically
     43 #
     44 BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
     45 MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
     46 EXTRAKEY_ENABLE  = no # Audio control and System control(+450)
     47 CONSOLE_ENABLE   = no  # Console for debug(+400)
     48 COMMAND_ENABLE   = yes # Commands for debug and configuration
     49 NKRO_ENABLE      = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
     50 BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
     51 MIDI_ENABLE      = no  # MIDI controls
     52 AUDIO_ENABLE     = no # Audio output on port C6
     53 UNICODE_ENABLE   = no  # Unicode
     54 BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
     55 RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight. 
     56 
     57 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
     58 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
     59