qmk

QMK Firmware
git clone git://git.z3bra.org/qmk.git
Log | Files | Refs | Submodules | LICENSE

rules.mk (2218B)


      1 # project specific files
      2 SRC =	keyboards/wilba_tech/wt_main.c \
      3 		keyboards/wilba_tech/wt_rgb_backlight.c \
      4 		drivers/issi/is31fl3733.c \
      5 		quantum/color.c \
      6 		drivers/arm/i2c_master.c
      7 
      8 ## chip/board settings
      9 #   the next two should match the directories in
     10 #   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
     11 MCU_FAMILY = STM32
     12 MCU_SERIES = STM32F3xx
     13 
     14 # Linker script to use
     15 #   it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
     16 #   or <this_dir>/ld/
     17 MCU_LDSCRIPT = STM32F303xC
     18 
     19 # Startup code to use
     20 #  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
     21 MCU_STARTUP = stm32f3xx
     22 
     23 # Board: it should exist either in <chibios>/os/hal/boards/
     24 #  or <this_dir>/boards
     25 BOARD = GENERIC_STM32_F303XC
     26 
     27 # Cortex version
     28 MCU  = cortex-m4
     29 
     30 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
     31 ARMV = 7
     32 
     33 USE_FPU = yes
     34 
     35 # Vector table for application
     36 # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
     37 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
     38 # OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
     39 OPT_DEFS =
     40 
     41 # Do not put the microcontroller into power saving mode
     42 # when we get USB suspend event. We want it to keep updating
     43 # backlight effects.
     44 OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
     45 
     46 # Options to pass to dfu-util when flashing
     47 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
     48 DFU_SUFFIX_ARGS = -p DF11 -v 0483
     49 
     50 # Build Options
     51 #   comment out to disable the options.
     52 #
     53 BACKLIGHT_ENABLE = no              # Enable keyboard backlight functionality
     54 BOOTMAGIC_ENABLE = no              # Virtual DIP switch configuration
     55 MOUSEKEY_ENABLE = yes              # Mouse keys
     56 EXTRAKEY_ENABLE = yes              # Audio control and System control
     57 CONSOLE_ENABLE = no                # Console for debug
     58 COMMAND_ENABLE = no                # Commands for debug and configuration
     59 SLEEP_LED_ENABLE = no              # Breathing sleep LED during USB suspend
     60 NKRO_ENABLE = yes                  # USB Nkey Rollover
     61 AUDIO_ENABLE = no                  # Audio output on port C6
     62 NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in
     63 #SERIAL_LINK_ENABLE = yes
     64 
     65 RAW_ENABLE = no
     66 DYNAMIC_KEYMAP_ENABLE = no
     67 CIE1931_CURVE = yes
     68 
     69 LAYOUTS = 60_ansi 60_iso