qmk

QMK Firmware
git clone git://git.z3bra.org/qmk.git
Log | Files | Refs | Submodules | LICENSE

config.h (4276B)


      1 /*
      2 Copyright 2018 Yiancar
      3 
      4 This program is free software: you can redistribute it and/or modify
      5 it under the terms of the GNU General Public License as published by
      6 the Free Software Foundation, either version 2 of the License, or
      7 (at your option) any later version.
      8 
      9 This program is distributed in the hope that it will be useful,
     10 but WITHOUT ANY WARRANTY; without even the implied warranty of
     11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     12 GNU General Public License for more details.
     13 
     14 You should have received a copy of the GNU General Public License
     15 along with this program.  If not, see <http://www.gnu.org/licenses/>.
     16 */
     17 
     18 #pragma once
     19 
     20 #include "config_common.h"
     21 
     22 /* USB Device descriptor parameter */
     23 #define VENDOR_ID       0xFEED
     24 #define PRODUCT_ID      0x0257
     25 #define DEVICE_VER      0x0001
     26 #define MANUFACTURER    Yiancar-Designs
     27 #define PRODUCT         HS60
     28 #define DESCRIPTION     GH60 compatible, tool free RGB keyboard
     29 
     30 /* key matrix size */
     31 #define MATRIX_ROWS 5
     32 #define MATRIX_COLS 14
     33 
     34 /*
     35  * Keyboard Matrix Assignments
     36  *
     37  * Change this to how you wired your keyboard
     38  * COLS: AVR pins used for columns, left to right
     39  * ROWS: AVR pins used for rows, top to bottom
     40  * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
     41  *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
     42  *
     43 */
     44 #define MATRIX_ROW_PINS { B0, B1, B2, B3, F7 }
     45 #define MATRIX_COL_PINS { F1, F4, F5, E6, F0, B7, D2, D3, D5, D4, D6, D7, B4, B5 }
     46 #define UNUSED_PINS     { B6, C6, C7, F6 }
     47 
     48 /* bootloader configuration */
     49 
     50 #define QMK_ESC_OUTPUT B5 // usually COL
     51 #define QMK_ESC_INPUT B2 // usually ROW
     52 
     53 /* COL2ROW, ROW2COL*/
     54 #define DIODE_DIRECTION COL2ROW
     55 
     56 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
     57 #define DEBOUNCE 5
     58 
     59 /* define if matrix has ghost (lacks anti-ghosting diodes) */
     60 //#define MATRIX_HAS_GHOST
     61 
     62 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
     63 #define LOCKING_SUPPORT_ENABLE
     64 /* Locking resynchronize hack */
     65 #define LOCKING_RESYNC_ENABLE
     66 
     67 /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
     68  * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
     69  */
     70 // #define GRAVE_ESC_CTRL_OVERRIDE
     71 
     72 /*
     73  * Force NKRO
     74  *
     75  * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
     76  * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
     77  * makefile for this to work.)
     78  *
     79  * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
     80  * until the next keyboard reset.
     81  *
     82  * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
     83  * fully operational during normal computer usage.
     84  *
     85  * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
     86  * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
     87  * bootmagic, NKRO mode will always be enabled until it is toggled again during a
     88  * power-up.
     89  *
     90  */
     91 //#define FORCE_NKRO
     92 
     93 /*
     94  * Magic Key Options
     95  *
     96  * Magic keys are hotkey commands that allow control over firmware functions of
     97  * the keyboard. They are best used in combination with the HID Listen program,
     98  * found here: https://www.pjrc.com/teensy/hid_listen.html
     99  *
    100  * The options below allow the magic key functionality to be changed. This is
    101  * useful if your keyboard/keypad is missing keys and you want magic key support.
    102  *
    103  */
    104 
    105 /*
    106  * Feature disable options
    107  *  These options are also useful to firmware size reduction.
    108  */
    109 
    110 /* disable debug print */
    111 //#define NO_DEBUG
    112 
    113 /* disable print */
    114 //#define NO_PRINT
    115 
    116 /* Backlight options */
    117 
    118 //This is experimental do not enable yet
    119 //#define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot)
    120 
    121 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
    122 #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
    123 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 215
    124 
    125 #define DRIVER_ADDR_1 0b1110100
    126 #define DRIVER_ADDR_2 0b1110101
    127 
    128 #define DRIVER_COUNT 2
    129 #define DRIVER_1_LED_TOTAL 30
    130 
    131 #ifdef  HS60_ANSI
    132 #define DRIVER_2_LED_TOTAL 31
    133 #else
    134 #define DRIVER_2_LED_TOTAL 32
    135 #endif
    136 
    137 #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)