qmk

Unnamed repository; edit this file 'description' to name the repository.
git clone git://git.z3bra.org/qmk.git
Log | Files | Refs | Submodules | LICENSE

rules.mk (1765B)


      1 
      2 ## Project specific files
      3 SRC=  babblePaste.c
      4 
      5 
      6 ifdef ASTAR
      7   CFLAGS=-D ASTAR
      8  MCU = atmega32u4
      9  SCULPT_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done ; \
     10 		 avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
     11 
     12 else
     13  MCU = at90usb1286
     14  SCULPT_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
     15 endif
     16 
     17 F_CPU = 16000000
     18 ARCH = AVR8
     19 F_USB = $(F_CPU)
     20 
     21 # Bootloader
     22 #     This definition is optional, and if your keyboard supports multiple bootloaders of
     23 #     different sizes, comment this out, and the correct address will be loaded 
     24 #     automatically (+60). See bootloader.mk for all options.
     25 ifdef ASTAR
     26   BOOTLOADER = caterina
     27 else
     28   BOOTLOADER = atmel-dfu
     29 endif
     30 
     31 # Interrupt driven control endpoint task(+60)
     32 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
     33 
     34 #
     35 BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
     36 MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
     37 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
     38 CONSOLE_ENABLE = yes        # Console for debug(+400)
     39 COMMAND_ENABLE = yes        # Commands for debug and configuration
     40 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
     41 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
     42 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
     43 NKRO_ENABLE = no            # USB Nkey Rollover
     44 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
     45 MIDI_ENABLE = no            # MIDI controls
     46 UNICODE_ENABLE = no         # Unicode
     47 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
     48 AUDIO_ENABLE = no           # Audio output on port C6
     49 
     50 
     51 USB = /dev/cu.usbmodem14141
     52 
     53  
     54 
     55 # upload: build
     56 # 	$(SCULPT_UPLOAD_COMMAND)