qmk

Unnamed repository; edit this file 'description' to name the repository.
git clone git://git.z3bra.org/qmk.git
Log | Files | Refs | Submodules | LICENSE

rules.mk (3433B)


      1 #----------------------------------------------------------------------------
      2 # On command line:
      3 #
      4 # make = Make software.
      5 #
      6 # make clean = Clean out built project files.
      7 #
      8 # That's pretty much all you need. To compile, always go make clean,
      9 # followed by make.
     10 #
     11 # For advanced users only:
     12 # make teensy = Download the hex file to the device, using teensy_loader_cli.
     13 #               (must have teensy_loader_cli installed).
     14 #
     15 #----------------------------------------------------------------------------
     16 
     17 # # project specific files
     18 SRC = i2c_master.c \
     19 	  matrix.c
     20 
     21 # MCU name
     22 MCU = atmega32u4
     23 
     24 # Processor frequency.
     25 #     This will define a symbol, F_CPU, in all source code files equal to the
     26 #     processor frequency in Hz. You can then use this symbol in your source code to
     27 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
     28 #     automatically to create a 32-bit value in your source code.
     29 #
     30 #     This will be an integer division of F_USB below, as it is sourced by
     31 #     F_USB after it has run through any CPU prescalers. Note that this value
     32 #     does not *change* the processor frequency - it should merely be updated to
     33 #     reflect the processor speed set externally so that the code can use accurate
     34 #     software delays.
     35 F_CPU = 16000000
     36 
     37 
     38 #
     39 # LUFA specific
     40 #
     41 # Target architecture (see library "Board Types" documentation).
     42 ARCH = AVR8
     43 
     44 # Input clock frequency.
     45 #     This will define a symbol, F_USB, in all source code files equal to the
     46 #     input clock frequency (before any prescaling is performed) in Hz. This value may
     47 #     differ from F_CPU if prescaling is used on the latter, and is required as the
     48 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
     49 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
     50 #     at the end, this will be done automatically to create a 32-bit value in your
     51 #     source code.
     52 #
     53 #     If no clock division is performed on the input clock inside the AVR (via the
     54 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
     55 F_USB = $(F_CPU)
     56 
     57 # Interrupt driven control endpoint task(+60)
     58 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
     59 
     60 
     61 # Boot Section Size in *bytes*
     62 #   Teensy halfKay   512
     63 #   Teensy++ halfKay 1024
     64 #   Atmel DFU loader 4096
     65 #   LUFA bootloader  4096
     66 #   USBaspLoader     2048
     67 BOOTLOADER = halfKay
     68 
     69 # Build Options
     70 #   comment out to disable the options.
     71 #
     72 BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
     73 MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
     74 EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
     75 CONSOLE_ENABLE   = yes  # Console for debug(+400)
     76 COMMAND_ENABLE   = yes # Commands for debug and configuration
     77 CUSTOM_MATRIX    = yes # Custom matrix file (taken and adapted from the ErgoDox EZ to handle custom number of columns)
     78 SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
     79 NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
     80 UNICODE_ENABLE   = yes # Unicode
     81 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
     82 MIDI_ENABLE = no            # MIDI controls
     83 UNICODE_ENABLE = no         # Unicode
     84 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
     85 AUDIO_ENABLE = no           # Audio output on port C6
     86 RGBLIGHT_ENABLE = no
     87 API_SYSEX_ENABLE = no