qmk

QMK Firmware
git clone git://git.z3bra.org/qmk.git
Log | Files | Refs | Submodules | LICENSE

rules.mk (2082B)


      1 # project specific files
      2 # SRC = ssd1306.c
      3 ## chip/board settings
      4 # the next two should match the directories in
      5 #  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
      6 MCU_FAMILY = STM32
      7 MCU_SERIES = STM32F0xx
      8 # linker script to use
      9 # it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
     10 #  or <this_dir>/ld/
     11 MCU_LDSCRIPT = STM32F072xB
     12 # startup code to use
     13 # is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
     14 MCU_STARTUP = stm32f0xx
     15 # it should exist either in <chibios>/os/hal/boards/
     16 #  or <this_dir>/boards
     17 BOARD = ST_STM32F072B_DISCOVERY
     18 # Cortex version
     19 # Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
     20 MCU  = cortex-m0
     21 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
     22 ARMV = 6
     23 # If you want to be able to jump to bootloader from firmware on STM32 MCUs,
     24 # set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
     25 # ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
     26 # a custom board definition that you plan to reuse).
     27 # If you're not setting it here, leave it commented out.
     28 # It is chip dependent, the correct number can be looked up here (page 175):
     29 # http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
     30 # This also requires a patch to chibios:
     31 #   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
     32 #STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
     33 
     34 # Build Options
     35 #   comment out to disable the options.
     36 #
     37 
     38 SRC += led.c \
     39       satisfaction_encoder.c \
     40       satisfaction_oled.c
     41 
     42 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
     43 MOUSEKEY_ENABLE = yes	# Mouse keys
     44 EXTRAKEY_ENABLE = yes	# Audio control and System control
     45 CONSOLE_ENABLE = yes	# Console for debug
     46 COMMAND_ENABLE = yes    # Commands for debug and configuration
     47 SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
     48 NKRO_ENABLE = yes	    # USB Nkey Rollover
     49 CUSTOM_MATRIX = no # Custom matrix file
     50 ENCODER_ENABLE = yes
     51 QWIIC_ENABLE += MICRO_OLED
     52 #BACKLIGHT_ENABLE = yes
     53 
     54 # RAW_ENABLE = yes
     55 # DYNAMIC_KEYMAP_ENABLE = yes
     56 
     57 DEFAULT_FOLDER = cannonkeys/satisfaction75/rev1