qmk

QMK Firmware
git clone git://git.z3bra.org/qmk.git
Log | Files | Refs | Submodules | LICENSE

rules.mk (2094B)


      1 # project specific files
      2 VPATH += keyboards/cannonkeys/bluepill
      3 SRC =	led.c \
      4       keyboard.c
      5 
      6 # GENERIC STM32F103C8T6 board - stm32duino bootloader
      7 OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
      8 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
      9 BOARD = GENERIC_STM32_F103
     10 
     11 # OPT_DEFS =
     12 # MCU_LDSCRIPT = STM32F103x8
     13 # BOARD = GENERIC_STM32_F103
     14 
     15 ## chip/board settings
     16 # the next two should match the directories in
     17 #  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
     18 MCU_FAMILY = STM32
     19 MCU_SERIES = STM32F1xx
     20 # linker script to use
     21 # it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
     22 #  or <this_dir>/ld/
     23 # startup code to use
     24 # is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
     25 MCU_STARTUP = stm32f1xx
     26 # it should exist either in <chibios>/os/hal/boards/
     27 #  or <this_dir>/boards
     28 # Cortex version
     29 # Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
     30 MCU  = cortex-m3
     31 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
     32 ARMV = 7
     33 # If you want to be able to jump to bootloader from firmware on STM32 MCUs,
     34 # set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
     35 # ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
     36 # a custom board definition that you plan to reuse).
     37 # If you're not setting it here, leave it commented out.
     38 # It is chip dependent, the correct number can be looked up here (page 175):
     39 # http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
     40 # This also requires a patch to chibios:
     41 #   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
     42 #STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
     43 
     44 DFU_ARGS = -d 1eaf:0003 -a 2 -R
     45 
     46 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
     47 MOUSEKEY_ENABLE = yes	# Mouse keys
     48 EXTRAKEY_ENABLE = yes	# Audio control and System control
     49 CONSOLE_ENABLE = yes	# Console for debug
     50 COMMAND_ENABLE = yes    # Commands for debug and configuration
     51 SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
     52 NKRO_ENABLE = yes	    # USB Nkey Rollover
     53 BACKLIGHT_ENABLE = yes
     54 RGBLIGHT_ENABLE = yes
     55 ENCODER_ENABLE = yes
     56 
     57 LAYOUTS = ortho_5x15