qmk

QMK Firmware
git clone git://git.z3bra.org/qmk.git
Log | Files | Refs | Submodules | LICENSE

config.h (2475B)


      1 /*
      2 Copyright 2018 Carlos Filoteo
      3 
      4 This program is free software: you can redistribute it and/or modify
      5 it under the terms of the GNU General Public License as published by
      6 the Free Software Foundation, either version 2 of the License, or
      7 (at your option) any later version.
      8 
      9 This program is distributed in the hope that it will be useful,
     10 but WITHOUT ANY WARRANTY; without even the implied warranty of
     11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     12 GNU General Public License for more details.
     13 
     14 You should have received a copy of the GNU General Public License
     15 along with this program.  If not, see <http://www.gnu.org/licenses/>.
     16 */
     17 
     18 #pragma once
     19 
     20 #include "config_common.h"
     21 
     22 /* USB Device descriptor parameter */
     23 #define VENDOR_ID       0xFEED
     24 #define PRODUCT_ID      0x0000
     25 #define DEVICE_VER      0x0001
     26 #define MANUFACTURER    40percent.club
     27 #define PRODUCT         ut47
     28 #define DESCRIPTION     An awesome 40% keyboard
     29 
     30 /* key matrix size */
     31 #define MATRIX_ROWS 4
     32 #define MATRIX_COLS 12
     33 
     34 #define MATRIX_ROW_PINS { D1, D0, D4, C6 }
     35 #define MATRIX_COL_PINS { D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 }
     36 #define UNUSED_PINS
     37 
     38 /* COL2ROW, ROW2COL*/
     39 #define DIODE_DIRECTION COL2ROW
     40 
     41 // #define BACKLIGHT_PIN B7
     42 // #define BACKLIGHT_BREATHING
     43 // #define BACKLIGHT_LEVELS 3
     44 
     45 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
     46 #define DEBOUNCE 5
     47 
     48 /* define if matrix has ghost (lacks anti-ghosting diodes) */
     49 //#define MATRIX_HAS_GHOST
     50 
     51 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
     52 #define LOCKING_SUPPORT_ENABLE
     53 /* Locking resynchronize hack */
     54 #define LOCKING_RESYNC_ENABLE
     55 
     56 /* Enable GNAP matrix serial output */
     57 #define GNAP_ENABLE
     58 
     59 /* USART configuration */
     60 #ifdef __AVR_ATmega32U4__
     61 #      define SERIAL_UART_BAUD 9600
     62 #      define SERIAL_UART_DATA UDR1
     63 #      define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
     64 #      define SERIAL_UART_RXD_VECT USART1_RX_vect
     65 #      define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
     66 #      define SERIAL_UART_INIT() do { \
     67             /* baud rate */ \
     68             UBRR1L = SERIAL_UART_UBRR; \
     69             /* baud rate */ \
     70             UBRR1H = SERIAL_UART_UBRR >> 8; \
     71             /* enable TX */ \
     72             UCSR1B = _BV(TXEN1); \
     73             /* 8-bit data */ \
     74             UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
     75             sei(); \
     76         } while(0)
     77 #   else
     78 #       error "USART configuration is needed."
     79 #endif