qmk

QMK Firmware
git clone git://git.z3bra.org/qmk.git
Log | Files | Refs | Submodules | LICENSE

config.h (5771B)


      1 /*
      2 Copyright 2012 Jun Wako <wakojun@gmail.com>
      3 
      4 This program is free software: you can redistribute it and/or modify
      5 it under the terms of the GNU General Public License as published by
      6 the Free Software Foundation, either version 2 of the License, or
      7 (at your option) any later version.
      8 
      9 This program is distributed in the hope that it will be useful,
     10 but WITHOUT ANY WARRANTY; without even the implied warranty of
     11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     12 GNU General Public License for more details.
     13 
     14 You should have received a copy of the GNU General Public License
     15 along with this program.  If not, see <http://www.gnu.org/licenses/>.
     16 */
     17 
     18 #pragma once
     19 
     20 #include "config_common.h"
     21 
     22 /* USB Device descriptor parameter */
     23 #define VENDOR_ID       0xCEEB
     24 #define PRODUCT_ID      0x0510
     25 #define DEVICE_VER      0x0101
     26 #define MANUFACTURER    di0ib
     27 #define PRODUCT         MF68
     28 #define DESCRIPTION     Magicforce 68 with programmable PCB replacement
     29 
     30 /* key matrix size */
     31 #define MATRIX_ROWS 8
     32 #define MATRIX_COLS 9
     33 
     34 /*
     35  * Keyboard Matrix Assignments
     36  *
     37  * Change this to how you wired your keyboard
     38  * COLS: AVR pins used for columns, left to right
     39  * ROWS: AVR pins used for rows, top to bottom
     40  * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
     41  *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
     42  *
     43 */
     44 #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7, F6, F5, F4 }
     45 #define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, E6, B4 }
     46 #define UNUSED_PINS
     47 
     48 /* COL2ROW or ROW2COL */
     49 #define DIODE_DIRECTION COL2ROW
     50 
     51 #define BACKLIGHT_PIN B5
     52 #define BACKLIGHT_BREATHING
     53 #define BACKLIGHT_LEVELS 3
     54 
     55 // #define RGB_DI_PIN E2
     56 // #ifdef RGB_DI_PIN
     57 //   #define RGBLED_NUM 16
     58 //   #define RGBLIGHT_HUE_STEP 8
     59 //   #define RGBLIGHT_SAT_STEP 8
     60 //   #define RGBLIGHT_VAL_STEP 8
     61 //   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
     62 //   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
     63 // /*== all animations enable ==*/
     64 //   #define RGBLIGHT_ANIMATIONS
     65 // /*== or choose animations ==*/
     66 //   #define RGBLIGHT_EFFECT_BREATHING
     67 //   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
     68 //   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
     69 //   #define RGBLIGHT_EFFECT_SNAKE
     70 //   #define RGBLIGHT_EFFECT_KNIGHT
     71 //   #define RGBLIGHT_EFFECT_CHRISTMAS
     72 //   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
     73 //   #define RGBLIGHT_EFFECT_RGB_TEST
     74 //   #define RGBLIGHT_EFFECT_ALTERNATING
     75 // #endif
     76 
     77 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
     78 #define DEBOUNCE 5
     79 
     80 /* define if matrix has ghost (lacks anti-ghosting diodes) */
     81 //#define MATRIX_HAS_GHOST
     82 
     83 /* number of backlight levels */
     84 
     85 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
     86 #define LOCKING_SUPPORT_ENABLE
     87 /* Locking resynchronize hack */
     88 #define LOCKING_RESYNC_ENABLE
     89 
     90 /*
     91  * Force NKRO
     92  *
     93  * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
     94  * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
     95  * makefile for this to work.)
     96  *
     97  * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
     98  * until the next keyboard reset.
     99  *
    100  * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
    101  * fully operational during normal computer usage.
    102  *
    103  * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
    104  * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
    105  * bootmagic, NKRO mode will always be enabled until it is toggled again during a
    106  * power-up.
    107  *
    108  */
    109 //#define FORCE_NKRO
    110 
    111 /*
    112  * Magic Key Options
    113  *
    114  * Magic keys are hotkey commands that allow control over firmware functions of
    115  * the keyboard. They are best used in combination with the HID Listen program,
    116  * found here: https://www.pjrc.com/teensy/hid_listen.html
    117  *
    118  * The options below allow the magic key functionality to be changed. This is
    119  * useful if your keyboard/keypad is missing keys and you want magic key support.
    120  *
    121  */
    122 
    123 /* control how magic key switches layers */
    124 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
    125 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
    126 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
    127 
    128 /* override magic key keymap */
    129 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
    130 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
    131 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
    132 //#define MAGIC_KEY_HELP1          H
    133 //#define MAGIC_KEY_HELP2          SLASH
    134 //#define MAGIC_KEY_DEBUG          D
    135 //#define MAGIC_KEY_DEBUG_MATRIX   X
    136 //#define MAGIC_KEY_DEBUG_KBD      K
    137 //#define MAGIC_KEY_DEBUG_MOUSE    M
    138 //#define MAGIC_KEY_VERSION        V
    139 //#define MAGIC_KEY_STATUS         S
    140 //#define MAGIC_KEY_CONSOLE        C
    141 //#define MAGIC_KEY_LAYER0_ALT1    ESC
    142 //#define MAGIC_KEY_LAYER0_ALT2    GRAVE
    143 //#define MAGIC_KEY_LAYER0         0
    144 //#define MAGIC_KEY_LAYER1         1
    145 //#define MAGIC_KEY_LAYER2         2
    146 //#define MAGIC_KEY_LAYER3         3
    147 //#define MAGIC_KEY_LAYER4         4
    148 //#define MAGIC_KEY_LAYER5         5
    149 //#define MAGIC_KEY_LAYER6         6
    150 //#define MAGIC_KEY_LAYER7         7
    151 //#define MAGIC_KEY_LAYER8         8
    152 //#define MAGIC_KEY_LAYER9         9
    153 //#define MAGIC_KEY_BOOTLOADER     PAUSE
    154 //#define MAGIC_KEY_LOCK           CAPS
    155 //#define MAGIC_KEY_EEPROM         E
    156 //#define MAGIC_KEY_NKRO           N
    157 //#define MAGIC_KEY_SLEEP_LED      Z
    158 
    159 /*
    160  * Feature disable options
    161  *  These options are also useful to firmware size reduction.
    162  */
    163 
    164 /* disable debug print */
    165 //#define NO_DEBUG
    166 
    167 /* disable print */
    168 //#define NO_PRINT
    169 
    170 /* disable action features */
    171 //#define NO_ACTION_LAYER
    172 //#define NO_ACTION_TAPPING
    173 //#define NO_ACTION_ONESHOT
    174 //#define NO_ACTION_MACRO
    175 //#define NO_ACTION_FUNCTION